Difference between revisions of "Pillar design"

From QueensMineDesignWiki
Jump to: navigation, search
Line 22: Line 22:
 
|-
 
|-
 
|Barrier Pillars
 
|Barrier Pillars
|Solid blocks left between two mines or sections
+
|Solid blocks left between two mines or sections of a mine. Provides regional support in large mines to prevent accidents due to inrushes of water, gas, or explosions or a mine fire.
of a mine. Provides regional support in large
 
mines to prevent accidents due to inrushes
 
of water, gas, or explosions or a mine fire.
 
 
|-
 
|-
 
|Bracket Pillars
 
|Bracket Pillars

Revision as of 13:32, 4 February 2015

1.0 Classification of Pillars

1.1 Support Pillars

Support pillars are load carrying. Examples of support pillars include:

Type of Pillar Description
Sill Pillar Horizontal pillars that separate levels or stopes, often used when multiple levels are mined concurrently.
Room and Pillars Pillars are left in place in a predetermined and calculated pattern as rooms are mined out.
Yield Pillars Pillars are designed to fail by going past peak load carrying capacity. Roof-strata is maintained by relieving pressure in working areas and controlling transference of load to abutments that are clear of working areas and road ways.Yielded pillars still carry load.
Post Pillars Room and pillar variation where ore is mined out in a series of horizontal slices.
Barrier Pillars Solid blocks left between two mines or sections of a mine. Provides regional support in large mines to prevent accidents due to inrushes of water, gas, or explosions or a mine fire.
Bracket Pillars Slip on discontinuities may cause rockburst within stopes, which can cause equipment damageand injury or loss of life. Ore immediately adjacent to these geological structures is left unmined to protect the structure from mining induced stresses.


Please add a link to this page in the article that already exists on room and pillar mining.