Difference between revisions of "Design topics available"
From QueensMineDesignWiki
SDMcKinnon (talk | contribs) (edited mine service facilities) |
SDMcKinnon (talk | contribs) (→Mining methods) |
||
| Line 47: | Line 47: | ||
**[[Longitudinal longhole retreat]] |
**[[Longitudinal longhole retreat]] |
||
**[[Transverse longhole stoping]] |
**[[Transverse longhole stoping]] |
||
| ⚫ | |||
| ⚫ | |||
**[[Stope sequencing]] |
**[[Stope sequencing]] |
||
| ⚫ | |||
| ⚫ | |||
*[[Shrinkage stoping]] |
*[[Shrinkage stoping]] |
||
*[[Hard-rock room and pillar]] |
*[[Hard-rock room and pillar]] |
||
Revision as of 10:14, 5 February 2015
This page contains a hyperlinked list of pages that have been completed as part of Mine 448 - underground mine design project. Each topic has been completed as part of the course requirements for the design groups. It is hoped that with time, these guides will accumulate into a useful resource for the course. Comments on any of these topics can be left in the discussion page attached to each topic page.
List of topics for which pages are available:
Contents
Information required for mine design
The stages of mine design
- The stages of mine design
- Pre-evaluation study
- Scoping study
- Pre-feasibility study
- Feasibility study
- Detailed design
- Project management principles
Geotechnical engineering
- Master list of tasks required for various stages of mine design
- Site investigation and rock mass characterization
- Stability Graph Method
- Numerical modelling
- Ground support
- Backfill
- Mine dewatering
- Mining induced seismicity
Mining methods
- Factors influencing mining method selection
- Estimation of the potential production rate
- Block caving
- Sublevel caving
- Cut and fill
- Longhole mining
- Shrinkage stoping
- Hard-rock room and pillar
Mine infrastructure
- Equipment selection
- Crushers
- Shaft vs. Ramp Access
- Ramp design
- Shaft construction
- Mine service facilities
- Ore and waste passes
- Ventilation
